Notifications
Clear all
Circles first layer print issue
Hello,
I have had recent issues with my first layer when printing cirucular items (see pictures). I have tried calibrating, checking the print nozzle, different filament colors (printing with PLA every time), performed live z adjusts, increased the first layer height from 0.2 to 0.35, slowed down the print, increased flow, different circular designs and they all seem to have an issue when printing the long areas around the cutout hole it is almost like it isn't getting enough filament and it is stretching thin. The decagon is 36mm and the circle is 32mm, so they aren't huge prints. Rectangles and squares seem to print fine on the first layer. Any suggestions would be greatly appreciated, thank you.
Posted : 03/04/2024 10:24 pm