Notifications
Clear all

Another Y-Axis Vibration Thread  

  RSS
Christizzz
(@christizzz)
Eminent Member
Another Y-Axis Vibration Thread

I have been talking to support...till now no solution...

checked all screws.. tightened U-bolts, untightenend U bolts, Oiled the smooth rods, release the smooth rods supports and tightened them again... nothing seems to help...

First the Y motor Click https://drive.google.com/file/d/1xD7I-o4SiR6Ahz0WOceCHyQ01L9iYXeQ/view?usp=sharing and https://drive.google.com/file/d/12FPhY3ivxDS81ytyY9wN6_ZsK4bydhSQ/view?usp=sharing

and now this horrible vibrations.... https://drive.google.com/open?id=1RxZ82-XEmhD-Vf46oq_YqcS1e2bTXwod and https://drive.google.com/open?id=1mQqqMDulj6etXLwrXMNUYPUQ7LEFe0aQ i know i might need to grease the bearings... but still the printer is 1 week old... non of the review online shows such vibrations... and googling this i find a ton of similar issues..

Posted : 06/09/2018 1:05 pm
xzv.a
(@xzv-a)
New Member
Another Y-Axis Vibration Thread

I have been talking to support...till now no solution...

checked all screws.. tightened U-bolts, untightenend U bolts, Oiled the smooth rods, release the smooth rods supports and tightened them again... nothing seems to help...

Posted : 06/09/2018 4:27 pm
Knickohr
(@knickohr)
Member Moderator
Re: Another Y-Axis Vibration Thread

[mod-mode on]

I merged this two posts togehter because of exactly the same question but 2 different users. But it seems that both users are the same man ? 😯

[mod-mode off]

Thomas

Posted : 07/09/2018 8:43 am
Christizzz
(@christizzz)
Eminent Member
Topic starter answered:
Re: Another Y-Axis Vibration Thread

Definitely a bug in the Matrix 😀 ...the first post is the correct one.. the second... no idea

Posted : 07/09/2018 9:19 am
Share: