Notifications
Clear all
Ridges on the sides
Please, can anyone suggest why I get ridges on the sides of the cube?
The ridges are always aligned with the top of the holes, and there is no infill or some other structure behind that could be "shining" through. The model seems to be properly cut, and there are no variations in perimeters in that area. Here's the gcode: https://www.dropbox.com/s/nv0hfywy5endn20/Shelf.stl?dl=0
I know, it is a bit over-extruding, and I lowered that in live Tune by 5%, but the problem still persists (and going below is definitely not giving good results).
Thanks!
Posted : 28/06/2017 9:02 am