MK2S hot end nozzle Temperature issue
 
Notifications
Clear all

MK2S hot end nozzle Temperature issue  

  RSS
richard.r11
(@richard-r11)
New Member
MK2S hot end nozzle Temperature issue

Has anyone had an issue with the hot end temperature cycling up and down? On a preheat or when printing, the temperature for PLA never reaches 215 but hits 211 and cycles back down to 202 over and over again. Support said it was a thermistor and sent me a new one, but the new thermistor did not fix the issue as it continues to cycle up to 211 and down to 202.

Posted : 15/12/2017 9:32 pm
GertL
(@gertl)
Reputable Member
Re: MK2S hot end nozzle Temperature issue

Search for PID tuning here and have a look at below.
https://mattshub.com/2017/04/26/pid-tuning/

---
Gert

Posted : 16/12/2017 9:12 am
Share: