Notifications
Clear all
LIST OF G CODES
Can some on point me to a list of all the G codes that the Prusa Mk2 uses?
Posted : 30/06/2016 7:03 pm
Re: LIST OF G CODES
Jay
This is what I use for reference (Marlin): http://reprap.org/wiki/G-code
Other than that the actual codes used is listed in the firmware (Marlin_main.cpp)
Peter
Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…
Posted : 30/06/2016 7:05 pm
Re: LIST OF G CODES
Here is a link to marlin_main.cpp
https://github.com/prusa3d/Prusa-Firmware/blob/MK2/Firmware/Marlin_main.cpp
Posted : 30/06/2016 9:34 pm
Topic starter
answered:
Re: LIST OF G CODES
thanks
Posted : 30/06/2016 9:49 pm