Notifications
Clear all
Bed temp caliobration made things worse
Hi all,
I ran the bed temp calibration routine on my MK2 and now it isn't able to maintain the bed temp within 5-7 degrees of the set temp.
When running ABS I set the bed to 110 not only did it take 25 minutes to reach 110, once the print starts (small print) it never seems to be able to get back above 104-105.
Never remember having an issue until I ran the calibration. Is there a way to "undo" it?
Also, any thoughts on why the bed is taking so long to pre-heat now.
Thanks!
Posted : 09/02/2018 3:16 am