Prusa mk2 MMU with Cura
Hello,
For a number of reasons I would really like to use Cura 3 as the slicer for my mk2 with the multi material upgrade. I have just begun messing with the tool change scripts in Cura to see if I can generate something usable.
I wondering if anyone else is trying this or has any idea on the topic.
Re: Prusa mk2 MMU with Cura
I would love to do this as well, but haven't had any luck.
Re: Prusa mk2 MMU with Cura
I just want .05 layer with tower on Slic3r or Cura.
Re: Prusa mk2 MMU with Cura
Any body having any luck with Cura yet ?
Re: Prusa mk2 MMU with Cura
bump
Re: Prusa mk2 MMU with Cura
You really need to use a post-processor for any slicer which can't generate all the code needed for tool changes; it's not something that can be hand coded in the available G-code sections.
There's a guy who has written a post-processor for KISS; you could ask him, I guess....
Peter
Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…
Re: Prusa mk2 MMU with Cura
There's a guy who has written a post-processor for KISS; you could ask him, I guess....
Just dripping with sarcasm. 😀