Notifications
Clear all

Odd Slicing Error  

  RSS
Ken Hammond
(@ken-hammond)
Active Member
Odd Slicing Error

I'm printing a 2-color gamepiece for a customer using the MMU.  One side features a lion and after printing it contained just a few small spots of color, with the rest left empty.  I checked it in Prusa Slicer, and I see that it was printing exactly what the slicer had told it to print.  Has anyone seen this error with the slicer, and how did you fix it?

Posted : 11/05/2021 1:30 am
Ken Hammond
(@ken-hammond)
Active Member
Topic starter answered:
RE: Odd Slicing Error

I have a theory that the graphic contains too many small details that the slicer doesn't know how to handle.  I've asked the designer for a simplified graphic to see if it makes a difference.

Posted : 11/05/2021 1:49 am
fedor
(@fedor)
Member
RE: Odd Slicing Error

cool

Posted : 16/04/2025 7:35 pm
Diem
 Diem
(@diem)
Illustrious Member

Don't forget that the narrowest line you can print is effectively one extrusion width thick - default is 0.45mm with a 0.4mm nozzle.  Resulting in roughly 56dpi or 28lpi resolution.

Cheerio,

Posted : 17/04/2025 1:29 am
Share: