Notifications
Clear all
Bridging with ABS - Help!!!
I love the Inland ABS! The prints are great EXCEPT when there is bridging involved.
I did a temperature tower from 220c to 260c, which is the temperature range listed on the filament. 260c is at the bottom, and 220c is at the top.
I am using the standard settings for "Generic ABS" that is given in Slic3r Prusa Edition.
Any ideas? Thanks!
Posted : 26/06/2018 4:23 am
Re: Bridging with ABS - Help!!!
Try to play with the cooling fan.
Maybe the cooling for bridging can be increased.
slic3r :
Filament Settings - Cooling - Bridges Fan Speed (increase the number)
(if not activated, greyed out, for ABS click "Keep Fan Always On" and set "Fan Speed" to 0)
Thomas
Posted : 26/06/2018 9:03 am
Topic starter
answered:
Re: Bridging with ABS - Help!!!
Thanks. I will give that a shot. I currently have the bridging fan speed set to 30%.
Posted : 26/06/2018 3:52 pm