Notifications
Clear all

[Solved] MK2S Firmware Question  

  RSS
Cole
 Cole
(@cole)
New Member
MK2S Firmware Question

Hey,

I've got a MK2S and I have not done any upgrades to it like the mk2.5 or mk3. Before every print the screen is telling me that a new firmware is available for 3.7.2. On the firmware download screen the Mk2s only has 3.2.3. Should I download the Mk2.5 or Mk3 firmware and install it?

Thanks

Best Answer by Dave Avery:

3.2.3.... it sounds like you got a mk3s profile configured in the configuration wizard. part of the profile is the latest firmware version number

Posted : 17/07/2019 7:26 pm
Dave Avery
(@dave-avery)
Honorable Member
RE: MK2S Firmware Question

3.2.3.... it sounds like you got a mk3s profile configured in the configuration wizard. part of the profile is the latest firmware version number

Posted : 17/07/2019 8:29 pm
Cole
 Cole
(@cole)
New Member
Topic starter answered:
RE: MK2S Firmware Question

You're absolutely right. I had the checkmark on the Mk3 in PrusaSlicer. Thanks for the quick solution.

Posted : 17/07/2019 8:31 pm
Share: