Upgraded extruder assembly to a 2.5S But with MK2 BED
 
Notifications
Clear all

Upgraded extruder assembly to a 2.5S But with MK2 BED  

Page 2 / 2
  RSS
mollysmith54435
(@mollysmith54435)
New Member
RE:

Thanks for this info. I really want to know about here. 

Posted : 09/06/2022 8:41 pm
VlackRasberry
(@vlackrasberry)
Active Member
RE: Upgraded extruder assembly to a 2.5S But with MK2 BED

Additionally I had to tweak a few things in xyzcal.cpp, because the 32x32 calibration matrix would run out of the printers travel boundaries and lock the X and Y axies (loose steps, no calibration possible). To much to publish here, but I changed the xyzcal_scan_pixels_32x32_Zhop() function, so that it would initialize the pixels[] variable with zeros and only measure pixel/position 4-28 in X and Y direction. This finally gave me the new 32x32 scan calibration feature, without loosing steps

Hi wolf, is it possible for you to explain more in depth what you did in this step? I am trying to do the same thing and I am stuck.

Mk3s+Mk2.5s 13Mk2.5s 10a

Posted : 22/08/2023 3:14 pm
Page 2 / 2
Share: