MK 2.5 Printed parts
Hello All,
I wasnt sure where to put this so.....
Long story short, i disassembled my printer in readiness for the 2.5 upgrade before I knew that they have stopped selling the complete printed part set.
Link:
https://shop.prusa3d.com/en/mk25-and-mk25s-printer-parts/705-complete-plastic-parts-set-mk25.html
Is there anybody in the Hivemind who could print these for me please?
The usual financial recompense obviously offered.
Many Thanks in advance.
Ben
Re: MK 2.5 Printed parts
Hi Ben,
where do you live, (general area),
i live in west Yorkshire, UK...
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
Re: MK 2.5 Printed parts
Hello Joan,
Im based in South Devon.
ben
Re: MK 2.5 Printed parts
Hi Ben, to the best of my recall, the mk2 to mk2s upgrade comprised :
new smooth rods and linear bearings,
u bolts for the Y bearings,
new extruder housing and fan shroud
new Rambo housing
Y Distance piece
and a revised rambo case
I don't think you need anything except the Y distance piece, (STL above) goes between they motor and the frame, to reduce twisting...
The mk2s to mk2.5s upgrade comprises:
Magnetic MK52 Heatbed (12V) including smooth pei steel print sheet
Bondtech extruder gears
IR Filament Sensor + cables
P.I.N.D.A 2 with thermistor
Noctua fan 5v
Black fan-nozzle-shroud from easyABS
200g black(*) PETG filament
(I understand that you already have the hardware...
the mk2.5stl's include the R3 extruder housing.
the mk2.5 stl's also include an updated Rambo case.
I am not home until Monday, and I don't think I have any black petg... and definitely don't have any ABS for the cooling fan shroud.
hopefully someone in the UK will be able to help you,
If that doesn't work, Pm me on Tuesday and I will do my best to sort you out.
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
Re: MK 2.5 Printed parts
Hello Joan,
Yes, I have all the hardware sorted out. If you can let me know a price and timescale, when you get back of course, we could go from there.
Many Thanks,
Ben
RE: MK 2.5 Printed parts
@joantabb , I have PM'd you.
cheers
ben
RE: MK 2.5 Printed parts
Bit late (I have been on leave) but if Joan has not sorted you out get in touch?
I also live in South Devon (Exeter, work in Torquay)
Cheers
Chris
RE: MK 2.5 Printed parts
hello Chris,
Yep, Joan has very kindly got me sorted out. Thank you for your offer.
I'm in Newton, so just down the road rom you 🙂
cheers
ben
RE: MK 2.5 Printed parts
Hello All,
I wasnt sure where to put this so.....
Long story short, i disassembled my printer in readiness for the 2.5 upgrade before I knew that they have stopped selling the complete printed part set.
Link:
https://shop.prusa3d.com/en/mk25-and-mk25s-printer-parts/705-complete-plastic-parts-set-mk25.htmlIs there anybody in the Hivemind who could print these for me please?
The usual financial recompense obviously offered.Many Thanks in advance.
Ben
The mk2s to mk2.5s upgrade comprises:
Magnetic MK52 Heatbed (12V) including smooth pei steel print sheet
Bondtech extruder gears
IR Filament Sensor + cables
P.I.N.D.A 2 with thermistor
Noctua fan 5v
Black fan-nozzle-shroud from easyABS
200g black(*) PETG filament
(I understand that you already hav