Notifications
Clear all
Y axis Layer shifts
I have been observing layer shifts after some height only along the Y direction (bed movement) in my prints. The belt tension is set correctly but after hours of troubleshooting, I traced the problem to a crack in the Y motor mount.
What is the best way to replace this part without taking apart too many parts? It looks like I can just remove the nuts holding the frame and Y-axis assembly. Since the rods are threaded into the Y motor mount, looks like I have to take apart all the rods and re-assemble the Y-axis structure again 😢
How to prevent this from occurring in the future?
PS: Have been using this printer for almost 3 years now.
Posted : 15/05/2020 12:51 am