Nozzle GCode compatibility warning - How do I print this? (Printing help)

RE:

mvikman — Tue, 12 Dec 2023 01:20:23 +0000

Multi Tool: Settings -> Tools -> Tool x -> Nozzle Diameter

Single Tool: Hardware -> Nozzle Diameter

Sweetblu — Mon, 11 Dec 2023 02:02:26 +0000

The setting doesn't exist n the newest firmware... Absolutely NO options called Nozzle under hardware :(

Erving S. Erving — Wed, 22 Nov 2023 22:42:38 +0000

Many Thanks!

Acht — Tue, 07 Nov 2023 09:54:27 +0000

You find the settings on your Prusa XL Printer. Use the dial to access the Settings Menu (Cog Wheel Icon).

Erving S. Erving — Tue, 07 Nov 2023 02:39:17 +0000

Where exactly do I find this setting?

Thanks

OzFax — Sun, 27 Aug 2023 01:32:28 +0000

Found it!!

XL Settings -> Hardware -> Nozzle

I'll leave a comment in the On-Line Manual under Nozzle Change

OzFax — Sun, 27 Aug 2023 00:55:46 +0000

Changed nozzle to 0.4mm with adapter.

Sliced model in latest Prusaslicer (2.6.0) using system preset.

Get:

WARNING

The G-code isn't fully compatible

Nozzle diameter doesn't match

I can't find anywhere (else) to change nozzle diameter in Prusaslicer.

Is there something in the XL firmware I've missed altering when I changed the nozzle (that isn't mentioned in the Instructions)?