Avisos
Vaciar todo

Unofficial Prusa XL Waiting Thread  

Página 23 / 39
  RSS
Mattchu
(@mattchu)
Miembro
RE: Unofficial Prusa XL Waiting Thread

I got my email to ship this morning; it says once confirmed, allow one to two weeks for shipping. However, despite them showing the dual heads are shipping, you cannot select it as an upgrade option. Semi assembled can be upgraded to fully assembled, but there is no upgrade option for going to two heads (I want to swap to two heads fully assembled if it gets me it that much faster; and I want the two heads).

Speaking with support they said to check in a few days, since the dual heads are shipping.

I placed my order on November 18th, 2021 at 9:03am PST.

Respondido : 29/06/2023 9:51 pm
Mattchu
(@mattchu)
Miembro
RE: Unofficial Prusa XL Waiting Thread

Shipping says it's at $222.83 via DHL. US Customs in theory will take another 3% on top of that. So for those of you with singlehead semi assembled shipping to the USA, your approx. final bill will be $2289.50 cents.

Round up to nearest hundred, and that's $2300 as your expected price to pay, if it's less, rejoice, if it's within $50 more, I'd still say rejoice, cause new printer! 😛

Respondido : 29/06/2023 10:02 pm
DarkTeck
(@darkteck)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Got the DHL import fees bill to USA , it was an additional 139.63 on top of the 229 shipping from Prusa . About 370$ total shipping to get an XL to me 

Respondido : 30/06/2023 9:36 am
cwbullet
(@cwbullet)
Miembro
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

That is not terrible.  Congrats on getting close to receiving it.  I can't wait to hear about it.  

Posted by: @darkteck-3d

Got the DHL import fees bill to USA , it was an additional 139.63 on top of the 229 shipping from Prusa . About 370$ total shipping to get an XL to me 

 

--------------------
Chuck H
3D Printer Review Blog

Respondido : 30/06/2023 9:37 am
Ben
 Ben
(@ben-4)
Trusted Member
RE: Unofficial Prusa XL Waiting Thread

that is pricey.  That may be a deal breaker for me.

Respondido : 30/06/2023 4:51 pm
MileHigh3Der
(@milehigh3der)
Honorable Member
RE: Unofficial Prusa XL Waiting Thread

I still don't get why they don't do container loads of printers to that US branch and ship from there.  A bulk container load has to be afraction of the cost of single airfreight?  Plus, what is a couple of extra weeks?

Is that $139 for a dual or single?  I wonder what a 5 head will run?  Maybe it would be better all around to get a dual head and then add heads later so that they probably don't get caught in the duty bin.  But I have low confidence in PRUSA to get 'spare' heads out anytime soon.  Or just buy third party heads.  So far we just have 1.75 extruders.  I imagine that any other heads from Prusa will be a 50:50 for Xmas 2024...

What is Prusa's #1 product?  Anticipation...

Posted by: @darkteck-3d

Got the DHL import fees bill to USA , it was an additional 139.63 on top of the 229 shipping from Prusa . About 370$ total shipping to get an XL to me 

 

Respondido : 30/06/2023 5:00 pm
E For Extrude me gusta
Diem
 Diem
(@diem)
Illustrious Member

But then they'd have to hire premises for unpacking and redispatch, and local staff to do it and ...  there go all the savings.

Cheerio,

Respondido : 30/06/2023 5:09 pm
GuyH
 GuyH
(@guyh)
Reputable Member
RE: Unofficial Prusa XL Waiting Thread

How do Bambu Lab etc manage it? Stop making excuses. Prusa need to shape up fast else they are dead. They’ll be a filament supplier and have a slicer which likely others will take over

Respondido : 30/06/2023 5:58 pm
cwbullet
(@cwbullet)
Miembro
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

Doubt it.  

Posted by: @guyh

How do Bambu Lab etc manage it? Stop making excuses. Prusa need to shape up fast else they are dead. They’ll be a filament supplier and have a slicer which likely others will take over

 

--------------------
Chuck H
3D Printer Review Blog

Respondido : 30/06/2023 6:45 pm
cwbullet
(@cwbullet)
Miembro
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @milehigh3der

I still don't get why they don't do container loads of printers to that US branch and ship from there.  A bulk container load has to be afraction of the cost of single airfreight?  Plus, what is a couple of extra weeks?

Posted by: @darkteck-3d

Got the DHL import fees bill to USA , it was an additional 139.63 on top of the 229 shipping from Prusa . About 370$ total shipping to get an XL to me 

 

They do this, and you just have to order from Printed Solid.  That being said, you will also have to wait until they have them in stock.  

--------------------
Chuck H
3D Printer Review Blog

Respondido : 30/06/2023 6:51 pm
Win J.
(@win-j)
Miembro
RE: Unofficial Prusa XL Waiting Thread

Printed Solid is not a logistics company.

Posted by: @milehigh3der

I still don't get why they don't do container loads of printers to that US branch and ship from there.  A bulk container load has to be afraction of the cost of single airfreight?  Plus, what is a couple of extra weeks?

 

Respondido : 30/06/2023 6:53 pm
cwbullet
(@cwbullet)
Miembro
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

I never said they were.  I way indicating Prusa currently sends printers to the US that can be purchased without going through the current logisitics process.  You just have to buy them from the US vendor - Printed Solid.  

Posted by: @win-j

Printed Solid is not a logistics company.

Posted by: @milehigh3der

I still don't get why they don't do container loads of printers to that US branch and ship from there.  A bulk container load has to be afraction of the cost of single airfreight?  Plus, what is a couple of extra weeks?

 

 

--------------------
Chuck H
3D Printer Review Blog

Respondido : 30/06/2023 7:02 pm
Win J.
(@win-j)
Miembro
RE: Unofficial Prusa XL Waiting Thread

So, let’s look at this:

 

1. does not seem that the chorus of cancelation threats have manifested to an empty backlog.

2. PrusaSlicer is open source so others can use it within the license terms.  And while some have taken it over in terms of using it and either just putting a “skin” without attribution to the underlying code base or taking the open source and declining to release their mods per the license agreements.  So those firms should not be trusted.

 

Posted by: @guyh

How do Bambu Lab etc manage it? Stop making excuses. Prusa need to shape up fast else they are dead. They’ll be a filament supplier and have a slicer which likely others will take over

 

Respondido : 30/06/2023 7:03 pm
Win J.
(@win-j)
Miembro
RE: Unofficial Prusa XL Waiting Thread

My comment wasn’t aimed at you Chuck

Respondido : 30/06/2023 7:04 pm
cwbullet
(@cwbullet)
Miembro
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

No issue.  I was the person that brought up Printed Solid, so it sure looked like it was.  

Posted by: @win-j

My comment wasn’t aimed at you Chuck

 

--------------------
Chuck H
3D Printer Review Blog

Respondido : 30/06/2023 7:08 pm
DarkTeck
(@darkteck)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

For what it’s worth I have a great relationship with PrintedSolid . They are a great batch of individuals there and I have purchased quite a bit from them . I would recommend them to ANYONE ! 

Respondido : 30/06/2023 8:16 pm
burtronix me gusta
burtronix
(@burtronix)
Reputable Member
RE: Unofficial Prusa XL Waiting Thread

Let me count the reasons:

  1.  At current production rates, it would probably take more than a month to fill a container load specific for US (or North American) customers.
  2. They currently have no North American logistics presence. Printed Solid is a reseller for filament, accessories, & printers for education only.
  3. The cost to setup North American logistics operations is probably not warranted for the current production volume, & would eat into any expected cost benefit.
  4. Container shipping would only reduce the per-unit cost of shipping, not the duties. As mentioned above, those shipping cost savings would be negated by the additional logistics cost.
  5. The only way to get at reducing duties would be for a North American reseller to be involved. At this moment, Printed Solid is not equipped for that. And that doesn't eliminate duties - it only reduces them. The cost of setting up & having a reseller in the mix negates any possible benefit.
Posted by: @milehigh3der

I still don't get why they don't do container loads of printers to that US branch and ship from there.  A bulk container load has to be afraction of the cost of single airfreight?  Plus, what is a couple of extra weeks?

Is that $139 for a dual or single?  I wonder what a 5 head will run?  Maybe it would be better all around to get a dual head and then add heads later so that they probably don't get caught in the duty bin.  But I have low confidence in PRUSA to get 'spare' heads out anytime soon.  Or just buy third party heads.  So far we just have 1.75 extruders.  I imagine that any other heads from Prusa will be a 50:50 for Xmas 2024...

What is Prusa's #1 product?  Anticipation...

Posted by: @darkteck-3d

Got the DHL import fees bill to USA , it was an additional 139.63 on top of the 229 shipping from Prusa . About 370$ total shipping to get an XL to me 

 

 

Whatever you find to do with your hands, do with all your might!

Respondido : 30/06/2023 8:33 pm
Peter Main
(@peter-main)
Eminent Member
RE: Unofficial Prusa XL Waiting Thread
Wysłany przez: @milehigh3der
Posted by: @milehigh3der

I still don't get why they don't do container loads of printers to that US branch and ship from there.  A bulk container load has to be afraction of the cost of single airfreight?  Plus, what is a couple of extra weeks?

Posted by: @darkteck-3d

Got the DHL import fees bill to USA , it was an additional 139.63 on top of the 229 shipping from Prusa . About 370$ total shipping to get an XL to me 

Because they don't have enough printers to fill a container.  It would mean that, for example, all American customers would have to wait until a container load of American orders got to the top of the queue.  That could be 6 months.  And that would only save a bit on shipping, it would still have to be shipped across the U.S. to your home.  It also wouldn't save anything on import duties, they'd still have to be paid and included in the price (and possibly state sales tax too).

Respondido : 30/06/2023 8:37 pm
burtronix me gusta
Win J.
(@win-j)
Miembro
RE: Unofficial Prusa XL Waiting Thread

I wasn't critical of them, I to have had awesome interactions with Dave and Dustin.

Posted by: @darkteck-3d

For what it’s worth I have a great relationship with PrintedSolid . They are a great batch of individuals there and I have purchased quite a bit from them . I would recommend them to ANYONE ! 

 

Respondido : 30/06/2023 8:48 pm
indysam
(@indysam)
Active Member
RE: Unofficial Prusa XL Waiting Thread

Just got my duty email from DHL. $80.16 for my single head kit. 

Respondido : 30/06/2023 9:10 pm
Página 23 / 39
Compartir: