Question about replacing the head.
I received the XL5 head in December last year. I have also confirmed that I am able to make beautiful 5 colour prints. I have a question I would like to know. If the first head breaks, can I replace it with one of the other heads (2-5)? If so, do I just replace it or do I have to reconfigure the setup, which would be from 5 heads to 4 heads? Thanks in advance.
Best Answer by kimsan:
You can print with the remaining toolheads when others are disconnected. I just printed a part I needed for one toolhead that I had dismantled. When disconnecting a toolhead it will dissapear from the available toolheads list on the XL.
Simply select another toolhead in your slicer before printing.
RE: Question about replacing the head.
You can print with the remaining toolheads when others are disconnected. I just printed a part I needed for one toolhead that I had dismantled. When disconnecting a toolhead it will dissapear from the available toolheads list on the XL.
Simply select another toolhead in your slicer before printing.
RE: Question about replacing the head.
Thank you, Mr. Kim.This is my first time using a multi-head printer, so I still don't fully understand it.But I'm going to do my best because we have such a wonderful machine.Please continue to support us in the future.