5.0.0-RC Firmware for Original Prusa MK4
 
Avisos
Vaciar todo

Are the new Input Shaper profile names (Structural and Speed) self-explanatory? Poll is created on Aug 12, 2023

  
  

5.0.0-RC Firmware for Original Prusa MK4  

Página 1 / 6
  RSS
Jakub Dolezal
(@jakub-dolezal)
Miembro Admin
5.0.0-RC Firmware for Original Prusa MK4

Hi,

the firmware polishing of Input Shaper for Original Prusa MK4 is in its final stage, therefore it is time for a release candidate 5.0.0-RC. In case no major bugs are found, the next release will be a stable version of the Input Shaper for MK4.

Important steps:

  1. Read the full release notes on GitHub
  2. Flash the new 5.0.0-RC firmware
  3. Download the latest PrusaSlicer profiles for Input Shaper
  4. Leave feedback (vote in the poll and share your suggestions)
    • In case you select "No" in the poll, please add you suggestion in the comments.

Have a nice weekend and Happy Printing! 🙂

 

Assembly manuals

/ Knowledge Base
The guy behind Prusa assembly manuals...

Respondido : 12/08/2023 1:54 pm
BrutusBoots
(@brutusboots)
Trusted Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

Makes sense to me.

Respondido : 12/08/2023 2:06 pm
cwbullet
(@cwbullet)
Miembro
RE:

Yup.  Easy peasy.  Thanks for the upload.  

--------------------
Chuck H
3D Printer Review Blog

Respondido : 12/08/2023 3:16 pm
Paxer me gusta
jseyfert3
(@jseyfert3)
Reputable Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

I haven’t yet run the alpha firmware, but I’m thinking of putting the RC firmware on my MK4.

I’m assuming we still use the alpha printer profile in PrusaSlicer, given that I don’t see any new printer profiles?

Respondido : 12/08/2023 5:22 pm
Paxer me gusta
Walter Layher
(@walter-layher)
Prominent Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

There was a configuration update for PrusaSlicer a few days ago and the IS profiles have new names now (speed and structural) as described in the changelog for the RC.

Respondido : 12/08/2023 6:43 pm
jseyfert3 me gusta
PeterT
(@petert)
Eminent Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

So far I’ve only had problems; the nextruder jamming (clicking) at the start of print, even though it had loaded the filament seconds before. Nozzle cleaning took well over a minute. Several times I had to reset the printer to get passed that point 

Respondido : 12/08/2023 11:04 pm
Juts
 Juts
(@juts)
Active Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

Its probably more a slicer issue, but if its not fixable there should at least be a warning in the slicer. Input shaping with grid infill will fail in many cases. The grid overlaps cause the nozzle to catch at those speeds and it starts tearing through the infill. 

 

Confirmed it is still happening on this RC firmware, at least with PETG. 

Respondido : 13/08/2023 12:28 am
Yohannon me gusta
Ikario
(@ikario)
New Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

Is crash detection still not working? The release notes on the first alpha made it seem like it's not compatible with input shaping at all, so it'll never come back, but I'd like to think that's not the case otherwise that would be a HUGE bait and switch.  They made no mention of it after that.  Can someone confirm if it works? If not, would really love if someone from Prusa could comment on that and confirm if it is in the works and coming back or if it's a done deal that it is not.

Respondido : 13/08/2023 12:32 am
Thehead y Paxer me gusta
CupertinoGeek
(@cupertinogeek)
Active Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

Alpha 4 was working well for me. So Far, I see no issues with the 5RC . I love the new Input Shaper firmware. Cuts at least 50% of time from prints with no recognized degradation of print quality. Win-Win!!

Respondido : 13/08/2023 4:55 am
Aquaerics me gusta
Oaradla
(@oaradla)
Miembro
RE: 5.0.0-RC Firmware for Original Prusa MK4

I tested the vase mode with the 5.0.0 RC and the new slicer profiles (structural 0.4mm IS) and there is still the problem that a nat and the retracts are visible.

With the 4.7.2 it works without problems.

Respondido : 13/08/2023 7:25 am
Abuk007 me gusta
Stefan
(@stefan)
Estimable Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

Will this firmware also contain other lanuages than english?

As I can see on Github there are already translation files existing in 4.7.2, but not available on the printer.

Respondido : 13/08/2023 7:53 am
512MB
(@512mb)
Eminent Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

I recently installed the firmware and encountered an unexpected issue. Could you please review the GitHub issue report for details: [Link to the report]?

Respondido : 13/08/2023 10:21 am
cwbullet
(@cwbullet)
Miembro
RE: 5.0.0-RC Firmware for Original Prusa MK4

I have tested them for the last 24 hours.  Works pretty well for me.  

I test-printed an object that was essentially a large tube.  

Speed:

  • MK3S - 10h 43 M
  • MK4 - 7h 48 M
  • MK4 Input Shaper - 4h3M
  • Bambu P1P - 3h 43M

2 Inch(51mm) x 2Inch cube:

  • MK3S - 2h4m
  • MK4 - 1h33m
  • MK4 Input Shaper - 50m
  • Bambu P1P - 50m

I cannot figure out why round tube objects take longer in the Mk4 with input shaping but it is significant.

--------------------
Chuck H
3D Printer Review Blog

Respondido : 13/08/2023 12:36 pm
Paxer
(@paxer)
Active Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

 

Posted by: @ikario

Is crash detection still not working? The release notes on the first alpha made it seem like it's not compatible with input shaping at all, so it'll never come back, but I'd like to think that's not the case otherwise that would be a HUGE bait and switch.  They made no mention of it after that.  Can someone confirm if it works? If not, would really love if someone from Prusa could comment on that and confirm if it is in the works and coming back or if it's a done deal that it is not.

I am wondering about this too.

Respondido : 13/08/2023 10:18 pm
cwbullet
(@cwbullet)
Miembro
RE: 5.0.0-RC Firmware for Original Prusa MK4

That might be a better question to be posted on GitHub.  

Posted by: @paxer

 

Posted by: @ikario

Is crash detection still not working? The release notes on the first alpha made it seem like it's not compatible with input shaping at all, so it'll never come back, but I'd like to think that's not the case otherwise that would be a HUGE bait and switch.  They made no mention of it after that.  Can someone confirm if it works? If not, would really love if someone from Prusa could comment on that and confirm if it is in the works and coming back or if it's a done deal that it is not.

I am wondering about this too.

 

--------------------
Chuck H
3D Printer Review Blog

Respondido : 13/08/2023 10:23 pm
jvasileff
(@jvasileff)
Trusted Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

Crash detection is not enabled in 5.0.0-RC. You can test this by pushing on the bed or extruder during a print, and you'll get a layer shift instead of a crash.

I briefly ran a self-compiled version of the firmware, and noticed there was a dev menu item to enable crash detection, but I didn't try it.

Respondido : 13/08/2023 11:00 pm
Ikario
(@ikario)
New Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

Thank you for testing it! If you ever decide to enable it, report back.  I'm going to wait until the stable release before installing 5.0

The fact that there's a dev menu item for it though gives me some glimmer of hope.

Respondido : 14/08/2023 1:09 am
jseyfert3
(@jseyfert3)
Reputable Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

Running this now. Reprint of a part I just did without IS that was 17 hours on 0.3 mm Speed, cut it down to 11 hours with 0.2 mm Speed IS.

Impressive, it’s printing 50% more layers yet the time is still cut by 65%.

Respondido : 14/08/2023 2:26 am
jseyfert3
(@jseyfert3)
Reputable Member
RE: 5.0.0-RC Firmware for Original Prusa MK4
Posted by: @jvasileff

Crash detection is not enabled in 5.0.0-RC. You can test this by pushing on the bed or extruder during a print, and you'll get a layer shift instead of a crash.

I briefly ran a self-compiled version of the firmware, and noticed there was a dev menu item to enable crash detection, but I didn't try it.

FYI: Prusa says (for the MK3) to test crash detection, pinch the smooth rods on the X-axis near the extruder while printing. In bold letters they say do not push the extruder, as this does not simulate a real printing experience (a crash stops the extruder/bed, but does not push it). I think I also saw somewhere that Josef has stated that pushing can cause crash detection to not work, even if it works for actual crashes.

Caveat: I haven't ever tested crash detection myself.

Respondido : 14/08/2023 12:45 pm
SwissFreek
(@swissfreek)
Active Member
RE: 5.0.0-RC Firmware for Original Prusa MK4

How do the profiles in PrusaSlicer look now? Have they been fleshed out and added flexibles etc. or are we still limited to PLA and maybe PETG?

Respondido : 14/08/2023 1:14 pm
Página 1 / 6
Compartir: