12 minute Bonkers Benchy made me smile.
 
Notifications
Clear all

12 minute Bonkers Benchy made me smile.  

Page 1 / 2
  RSS
Zakoplex
(@zakoplex)
Eminent Member
12 minute Bonkers Benchy made me smile.

After countless spot-checks of Github to see if an alpha had been posted I was quite glad to see the Input Shaper alpha firmware along with the handful of MK4 gcode files.  Just had to give the 12 minute Benchy a whirl before sleep.  Well, um, seeing that MK4 spazzing out like one of my Vorons put a big smile on my face. Awesome to see and surprisingly good print. Printed with the included roll of Galaxy Black PLA it was tweaked for.  Looking forward to giving the MK4 IS profile a try over the weekend and will be interesting to see how things come together for Input Shaping on the bed-slinger that I default to when I want a no fuss good print.    

Posted : 27/05/2023 4:22 am
jas liked
Zakoplex
(@zakoplex)
Eminent Member
Topic starter answered:
RE: 12 minute Bonkers Benchy made me smile.

...photos...too slow to edit the original post...

Posted : 27/05/2023 4:30 am
SemichCSC, jas and liked
Polymira
(@polymira)
Member
RE: 12 minute Bonkers Benchy made me smile.

Here's mine, it's super hollow and feels so light it's weird. BUT it looks great and was fun to watch 🙂

Posted : 27/05/2023 4:46 am
SemichCSC, jas and liked
René
(@rene-3)
Reputable Member
RE: 12 minute Bonkers Benchy made me smile.

Patience is being rewarded

Posted : 27/05/2023 7:39 am
SemichCSC
(@semichcsc)
Active Member
RE: 12 minute Bonkers Benchy made me smile.

/Serge

Posted : 27/05/2023 11:27 am
René
(@rene-3)
Reputable Member
RE: 12 minute Bonkers Benchy made me smile.

And one more,

Posted : 27/05/2023 3:16 pm
jas and SemichCSC liked
BrutusBoots
(@brutusboots)
Trusted Member
RE: 12 minute Bonkers Benchy made me smile.

 

Posted by: @rene-3

Patience is being rewarded

Hey that's my video 😁

Posted : 28/05/2023 1:47 pm
Walter Layher
(@walter-layher)
Honorable Member
RE:

And here is another one.

I tried to embed the video but then there was a message from Wordfence that I did something bad ... 🙂

Well, some photos at least.

 

Posted : 28/05/2023 6:49 pm
Walter Layher
(@walter-layher)
Honorable Member
RE: 12 minute Bonkers Benchy made me smile.

I just sliced my first part with the new IS profiles. After the first layer is complete, the MK4 really means business! 🙂

Posted : 28/05/2023 7:25 pm
BrutusBoots
(@brutusboots)
Trusted Member
RE: 12 minute Bonkers Benchy made me smile.

 

Posted by: @walter-layher

I just sliced my first part with the new IS profiles. After the first layer is complete, the MK4 really means business! 🙂

it is surreal seeing it whip around like it does after 5 years of using an MK3S/MK4 

Posted : 28/05/2023 7:56 pm
Zakoplex liked
Walter Layher
(@walter-layher)
Honorable Member
RE: 12 minute Bonkers Benchy made me smile.

I am printing a gridfinity bin, starting with a simple part and all that. The previous settings for the part with PETG said 5 hours 3 minutes, with the new IS profiles and PLA it says 2 hours 3 minutes. I am curious how the finished part will look. After almost 1 hour it is at 44 % and everything looks fine so far.

Posted : 28/05/2023 8:06 pm
BrutusBoots
(@brutusboots)
Trusted Member
RE: 12 minute Bonkers Benchy made me smile.

 

Posted by: @walter-layher

I am printing a gridfinity bin, starting with a simple part and all that. The previous settings for the part with PETG said 5 hours 3 minutes, with the new IS profiles and PLA it says 2 hours 3 minutes. I am curious how the finished part will look. After almost 1 hour it is at 44 % and everything looks fine so far.

 

I've printed a half dozen or so things and they've all been perfect 

Posted : 28/05/2023 8:32 pm
Walter Layher
(@walter-layher)
Honorable Member
RE: 12 minute Bonkers Benchy made me smile.

The g-code spatula by Prusa that came with the new firmware also came out great for me. That was the first part I tried after upgrading the firmware.

Posted : 28/05/2023 8:35 pm
Walter Layher
(@walter-layher)
Honorable Member
RE: 12 minute Bonkers Benchy made me smile.

Came out nice, more or less same quality as before. Can't find any obvious flaws in the print.

 

Posted : 28/05/2023 9:43 pm
Zakoplex
(@zakoplex)
Eminent Member
Topic starter answered:
RE:

I'm finding the quality from the Alpha profile pretty darn good and certainly night and day in terms of speed.  Have had a couple of unexpected explosions with PETG. rectilinear infill that didn't stick and spaghettied, and some weird poorly adhering infill on first layers.  Things where the normal speed profile has been happy.  Have to say I was NOT sure how the input shaping bedslinger would go but I'm now feeling much more optimistic about it.  Seriously big time savings on some prints and good quality prints.   Also noticed that the Y input shaping varies with weight, which I was kind of assuming it would have to, so I guess that print orientation for some things with many parallel walls in one direction will print faster when twisted 90 degrees.  Going to enjoy watching this IS move from alpha->beta->release.  Throw in high flow, first part nozzles and we're off to the races. 🙂 Oh, yeah, then a Prusa XL not XL. 😛 Nice to see some Prusa stuff getting out in the wild.

Posted : 30/05/2023 12:45 am
BrutusBoots
(@brutusboots)
Trusted Member
RE: 12 minute Bonkers Benchy made me smile.

 

Posted by: @zakoplex

I'm finding the quality from the Alpha profile pretty darn good and certainly night and day in terms of speed.  Have had a couple of unexpected explosions with PETG. rectilinear infill that didn't stick and spaghettied, and some weird poorly adhering infill on first layers.  Things where the normal speed profile has been happy.  Have to say I was NOT sure how the input shaping bedslinger would go but I'm now feeling much more optimistic about it.  Seriously big time savings on some prints and good quality prints.   Also noticed that the Y input shaping varies with weight, which I was kind of assuming it would have to, so I guess that print orientation for some things with many parallel walls in one direction will print faster when twisted 90 degrees.  Going to enjoy watching this IS move from alpha->beta->release.  Throw in high flow, first part nozzles and we're off to the races. 🙂 Oh, yeah, then a Prusa XL not XL. 😛 Nice to see some Prusa stuff getting out in the wild.

I ordered a CHT nozzle to experiment with 😎

Posted : 30/05/2023 1:34 am
Zakoplex liked
OB1
 OB1
(@ob1)
Trusted Member
RE: 12 minute Bonkers Benchy made me smile.

 

Posted by: @zakoplex

I'm finding the quality from the Alpha profile pretty darn good and certainly night and day in terms of speed.  Have had a couple of unexpected explosions with PETG. rectilinear infill that didn't stick and spaghettied, and some weird poorly adhering infill on first layers.  Things where the normal speed profile has been happy.  Have to say I was NOT sure how the input shaping bedslinger would go but I'm now feeling much more optimistic about it.  Seriously big time savings on some prints and good quality prints.   Also noticed that the Y input shaping varies with weight, which I was kind of assuming it would have to, so I guess that print orientation for some things with many parallel walls in one direction will print faster when twisted 90 degrees.  Going to enjoy watching this IS move from alpha->beta->release.  Throw in high flow, first part nozzles and we're off to the races. 🙂 Oh, yeah, then a Prusa XL not XL. 😛 Nice to see some Prusa stuff getting out in the wild.

Same with me: very good quality prints at 2-3x the speed with the IS profile. 

Posted : 30/05/2023 4:24 am
RickM
(@rickm-3)
Trusted Member
RE: 12 minute Bonkers Benchy made me smile.

Yes indeed. 27 minute benchy was outstanding quality and 12 minute benchy was really really good as a demo.

I imagine PETg settings will require some tweaking what with volumetric flow constraints.  Looking forward to experimenting.

Posted : 01/06/2023 10:59 pm
BrutusBoots
(@brutusboots)
Trusted Member
RE: 12 minute Bonkers Benchy made me smile.

 

Posted by: @rickm-3

Yes indeed. 27 minute benchy was outstanding quality and 12 minute benchy was really really good as a demo.

I imagine PETg settings will require some tweaking what with volumetric flow constraints.  Looking forward to experimenting.

I've been printing with PETG for about 80% of my prints (with input shaping). No issues to report yet.

Posted : 01/06/2023 11:20 pm
RickM
(@rickm-3)
Trusted Member
RE: 12 minute Bonkers Benchy made me smile.

@BrutusBoots

Fantastic.  We have some PETg parts we'd love to speed up.  Will try soon.

Posted : 02/06/2023 4:50 pm
Page 1 / 2
Share: