Printing is happening unevenly - How do I print this? (Printing help) https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/printing-is-happening-unevenly/ Prusa3D Forum Discussion Board en-US Tue, 16 Jun 2026 18:25:36 +0000 wpForo 60 RE: Printing is happening unevenly https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/printing-is-happening-unevenly/#post-781343 Sun, 08 Feb 2026 08:03:35 +0000 Looking at the print video we can see that the filament in tte left front corner is not squished enough ( looks like a squeezed mayonnaise ;) ), while the back right corner has a smudges over the plate.

This looks like you X axis is too high on the left side of the printer and too oow on the right side of the printer. Please move the print head to the 1mm Z on the right front edge, disable motors and then move the print head to the left front corner and see if there is a height difference. Do the same foe other corners, watch out not to scratch the print sheet.

You need to start with https://help.prusa3d.com/article/squaring-your-mini_158518

]]> How do I print this? (Printing help) _KaszpiR_ https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/printing-is-happening-unevenly/#post-781343 Printing is happening unevenly https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/printing-is-happening-unevenly/#post-766409 Tue, 07 Oct 2025 00:19:00 +0000 IMG_3679

I've tried washing the sheet with dish soap, cleaning with alcohol wipes, and applying a thin layer of glue stick.  And I've tried multiple sheets.  I keep having the same issue.  I've even tried ensuring that the sheet is level.  I'd appreciate any help!

]]> How do I print this? (Printing help) Julie Pearl https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/printing-is-happening-unevenly/#post-766409