Benachrichtigungen
Alles löschen
Seite 2 / 2
Vorherige
RE: Ninja Flex
Hi!
Finally after tuning the idler and printing settings I got at least something. Bottom part looks OK but the roof is ugly.
Any ideas what to tune? Looks like a bit underextrusion?
Nozzle temp was 240C
Veröffentlicht : 21/03/2020 10:48 am
RE: Ninja Flex
Hi!
Finally after tuning the idler and printing settings I got at least something. Bottom part looks OK but the roof is ugly.
Any ideas what to tune? Looks like a bit underextrusion?
Nozzle temp was 240C
Veröffentlicht : 21/03/2020 10:48 am
Themenstarter answered:
RE: Ninja Flex
Hmm, not sure how to handle overhang with TPU. Here is another pic of some TPU parts, feet for the MINI:
Veröffentlicht : 21/03/2020 1:47 pm
RE: Ninja Flex
Can you share your slicer setting for Flex filament ?
I have Sunlu TPU, and i cannot print correctly with Flex Profile.
Veröffentlicht : 17/04/2020 7:33 pm
Seite 2 / 2
Vorherige