Notifications
Clear all
How should you clean the heatbed?
I've bought a secondhand Prusa Mini and noticed there are some specks of material and dust etc. on the heatbed - what is the best way to clean this without damaging anything?
Please note I'm talking about the heat bed not steel sheet
Best Answer by _KaszpiR_:
Just don't clean it at all, if it prints well on the bed then leave it as is.
If you still need to:
Ensure bed is cold.
Dry cleaning with kitchen sponge, don't rub it too hard.
Then Isopropanol (at least 80%) on soft cloth.
Posted : 30/10/2023 5:44 pm
RE:
Just don't clean it at all, if it prints well on the bed then leave it as is.
If you still need to:
Ensure bed is cold.
Dry cleaning with kitchen sponge, don't rub it too hard.
Then Isopropanol (at least 80%) on soft cloth.
See my GitHub and printables.com for some 3d stuff that you may like.
Posted : 30/10/2023 9:35 pm
Jake liked