https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/formfutura-not-compatible-anyone-using-rpet-successfully/ Prusa3D Forum Discussion Board en-US Wed, 15 Apr 2026 19:07:18 +0000 wpForo 60 https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/formfutura-not-compatible-anyone-using-rpet-successfully/#post-622737 Fri, 07 Oct 2022 18:28:16 +0000 I've been able to print rPET successfully with a few modifications to the "Generic PETG" settings on the slicer. I took the hotend temp down to 230 C and the bed temp to 80 C.

]]> How do I print this? (Printing help) tmcglinn https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/formfutura-not-compatible-anyone-using-rpet-successfully/#post-622737 https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/formfutura-not-compatible-anyone-using-rpet-successfully/#post-501808 Wed, 15 Sep 2021 14:55:32 +0000 I noted that Formfutura filaments are listed as "incompatible" in PrusaSlicer for Prusa printers (Mini specifically), but thought I had seen some folks were using anyway. Have any of you used their rPET in your Mini successfully and if so, what settings worked best for you?

 

]]> How do I print this? (Printing help) Snagtooth https://forum.prusa3d.com/forum/how-do-i-print-this-printing-help/formfutura-not-compatible-anyone-using-rpet-successfully/#post-501808