Troubleshooting printing issues, could anybody please print this test model on a MINI ?
Hi,
I've been sometimes having issues with my prints for quite a while now.
I've made this test project to troubleshoot the issue and hitting a deadend.
I've spent a lot of time talking to support and tried a number of things, including factory-resetting my mini, installing a fresh version of a slicer on another PC, reassembling the hotbreak and trying a bazillion of things that the support has suggested.
The picture of the kind of issues that I have is attached below. It typically happens when the shapes are spaced from each other horizontally (if they are aligned vertically it's typically fine).
I'm wondering, if this is a problem with a slicer or if anybody has similar issues at this point, or if even other mini would print this fine.
Could anyone please print this test project and show me the photos? It's 2.4 grams of filament. bgcode and 3mf on google drive
Also I'm wondering if anyone has seen an issue like this.
Thanks
RE: Troubleshooting printing issues, could anybody please print this test model on a MINI ?
Ok, it looks like this is a known issue in a firmware, here's the related thread on GitHub:
https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/2997
RE:
I see you have found GitHub issue related to this https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/2997#issue-1590267695
Ill just leave it here for others to be aware of those.
See my GitHub and printables.com for some 3d stuff that you may like.
RE: Troubleshooting printing issues, could anybody please print this test model on a MINI ?
Also looks similiar to https://forum.prusa3d.com/forum/assembly-and-first-prints-troubleshooting/outer-walls-have-vertical-stripes-banding/
See my GitHub and printables.com for some 3d stuff that you may like.