Time Remaining Options on new firmware 4.1.0
Is there a option on the print time remaining to have it display Hrs - min instead of Actual time it will be finished. I like using connect when to check on my prints and liked the old way when it showed Hrs - min not the actual time it will be completed.
RE: Time Remaining Options on new firmware 4.1.0
I preferred the remaining time left also tbh, not sure why they changed it.
RE: Time Remaining Options on new firmware 4.1.0
My mini show remaining print time as default. It's show Hr and mins.
RE: Time Remaining Options on new firmware 4.1.0
@atomleef
Are you running the latest firmware 4.1.0?
RE: Time Remaining Options on new firmware 4.1.0
@rockytoptim
not sure about number, but i just update 2 weeks ago
RE: Time Remaining Options on new firmware 4.1.0
Sometimes, this would be handy. I suggest to add it as feature request directly in GitHub:
https://github.com/prusa3d/Prusa-Firmware-Buddy
Issues - New issue - Feature request
Also with estimated time of end, I have an issue. The estimated time in printer is different from web interface and almost every time wrong.
RE: Time Remaining Options on new firmware 4.1.0
@dangemask
I would love to see this both with and without octoprint.
--------------------
Chuck H
3D Printer Review Blog
RE: Time Remaining Options on new firmware 4.1.0
My Prusa Mini+ used to show the remaining time in hours and minutes but after updating to firmware 4.4.1 now it show the time in 24 hour clock that it will be completed. I don’t see any setting to change it back. Anyone know if it’s possible?
RE: Time Remaining Options on new firmware 4.1.0
Thanks for sharing. It's really useful and much more convenient.
Sometimes, this would be handy. I suggest to add it as feature request directly in GitHub:
https://github.com/prusa3d/Prusa-Firmware-Buddy/ Time Calculator
Issues - New issue - Feature requestAlso with estimated time of end, I have an issue. The estimated time in printer is different from web interface and almost every time wrong.