New Mini bed isn't level
I have successfully ran my prints and conducted the calibrations, but the right side of my bed isn't level with the rest. Specifically the right side is higher while the left is lower than the rest of the bed and I don't know how to make this adjustment as the Prusa MINI's settings only allow universal height adjustments. Can anyone assist?
RE: New Mini bed isn't level
https://help.prusa3d.com/en/article/xz-axis-skew-correction-mini_158518
RE: New Mini bed isn't level
I agree with @alexhung. Mine was the same way. This fixed my left to right skew.
RE: New Mini bed isn't level
this looks for the most part to be working. what if the skew is diagonal? It looks like the rear-right part of the bed is higher than the rest.
RE: New Mini bed isn't level
Check the screws to make sure that some of them are not higher on one side of another.
--------------------
Chuck H
3D Printer Review Blog