Filament coming out of top hatch of extruder
Hi all,
I've got a Prusa Mini + that I've only used a couple of hours, it was working great but since the last two days I'm encountering some problems, the filament seems to break at some point (not sure about this) and starts to come out from the inspection hatch on the extruder motor (see pictures).
I had installed a 0.25mm nozzle before, thinking that it's what was causing the issue I got back the 0.4mm nozzle, but here I am again.
Thanks for the help
RE: Filament coming out of top hatch of extruder
Photo of the inside after I've discharged (their is still the part of the filament that broke and is stuck in the extruder).
RE: Filament coming out of top hatch of extruder
Sorry for the spam, here is another photo after removal:
What filament is this? Have you used it successfully in the past?
Cheerio,
RE: Filament coming out of top hatch of extruder
I'm using Prusament Galaxy grey, I've had good print before yes.