Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!
 
Notifications
Clear all

Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!  

Stránka 8 / 8
  RSS
Nameless2nd
(@nameless2nd)
Active Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

Well, at least you should have access. I could ony see them after contacting support because something went wrong and I didn't have access to the spare parts.

Napsal : 24/01/2020 12:51 pm
Texy
 Texy
(@texy)
Reputable Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!
Posted by: @littleneutrino

@texy

If you have purchased one, you have access to the Spare parts section on the website.

https://shop.prusa3d.com/en/68-mini

That is true today ,but wasn't when I made my post.....

Napsal : 27/01/2020 1:42 pm
Oxygen
(@oxygen)
Reputable Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

I was told you only have access to the spare parts after the Mini has been shipped to you...

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Napsal : 27/01/2020 2:46 pm
LittleNeutrino
(@littleneutrino)
Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

@oxygen

I have had access to it for weeks and mine wont ship until hopefully the 29th

Napsal : 27/01/2020 2:49 pm
Oxygen
(@oxygen)
Reputable Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

have you contacted support about that? Jakub told me it was access only when the item was shipped

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Napsal : 27/01/2020 2:51 pm
LittleNeutrino
(@littleneutrino)
Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

@oxygen

It was not ordered until the 14th, so it is not schedule to even be available for shipping until the 29th according to the shipping table.

https://help.prusa3d.com/article/6OdtbKF1bw-shippingtable

This post was modified před 5 years by LittleNeutrino
Napsal : 27/01/2020 2:56 pm
Oxygen
(@oxygen)
Reputable Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

I am even further away ordered on the 19th Oct so according to the shipping table -> From March 2, 2020.

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Napsal : 27/01/2020 3:01 pm
cwbullet
(@cwbullet)
Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

That the shipping table with a grain of salt until they start shipping again.  

--------------------
Chuck H
3D Printer Review Blog

Napsal : 27/01/2020 3:05 pm
LittleNeutrino
(@littleneutrino)
Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

@charles-h13

That may be true however, that is the link to the page they will update, If/ When they update it.

Napsal : 27/01/2020 3:09 pm
Texy
 Texy
(@texy)
Reputable Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!
Posted by: @littleneutrino

@charles-h13

That may be true however, that is the link to the page they will update, If/ When they update it.

Google is working for me 🤣 

https://help.prusa3d.com/article/6OdtbKF1bw-shippingtable

 

Napsal : 27/01/2020 3:50 pm
steve
(@steve-13)
Trusted Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

Hey I'm a MK2 and MK3 owner and just received and built the Mini. I just wanted to thank the entire Prusa team for yet again another awesome machine and a great experience from out-of-the-box to first print. The Mini is a feat of engineering - from the simple assembly of just a few parts to the quality of the prints to the excellent online assembly instructions/pictures to the great tech support, it was well worth the wait. I really appreciate all the little but important details in the design, they don't go unnoticed.

Keep up the innovation and great work!

Napsal : 08/03/2020 3:00 am
Lichtjaeger
(@lichtjaeger)
Noble Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

Does anyone know why the mini only has a single drive extruder?

I hoped dual-drive would be standard now and the geared-drive is an extension/evolution of this.

Not that I complain. My Mini does print fantastic. 🥰

Napsal : 08/03/2020 11:56 am
kevinb2 se líbí
cwbullet
(@cwbullet)
Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

@lichtjaeger

To reduce cost?

--------------------
Chuck H
3D Printer Review Blog

Napsal : 08/03/2020 2:57 pm
kevinb2 se líbí
Ulix
 Ulix
(@ulix)
Trusted Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

A peine reçu , déjà sa foire .

Je charge mon PLa il sort bien un beau boudin .

je lance un job il purge bien, mais un moment donné un bruit de PLA qui saute et par la suite le PLA sort plus,comme bouché.

Je pensais que mon Z étais  mal réglé, mais même en mode calibrage sa fonctionne pas. plus rien sort. je pense que le nylon sur l extrudeur foire. le fil ce mais de travers et bloque tout, oblige de retiré le fils et refaire.

il me semble avoir vue un sujet sur ce problème?

merci

 

 

Mini Prusia mini + et Bondtech.
Une S3 arrivé et sa fonctionne

Napsal : 21/04/2020 11:34 am
Oxygen
(@oxygen)
Reputable Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

Please repost your question in the appropriate forum -- this area is for English speaking Mini users.

 

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Napsal : 21/04/2020 11:58 am
Ulix
 Ulix
(@ulix)
Trusted Member
RE: Annonce de l'original Prusa MINI - un cheval de bataille d'impression 3D intelligent et compact!

@oxygen

Dessolé.

Mini Prusia mini + et Bondtech.
Une S3 arrivé et sa fonctionne

Napsal : 21/04/2020 12:05 pm
steve
(@steve-13)
Trusted Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

@lichtjaeger

Why do you care if it's working properly?!? Seriously...

Napsal : 22/04/2020 2:25 am
Benjamin
(@benjamin-8)
New Member
RE: Announcing the Original Prusa MINI - a smart & compact 3D printing workhorse!

awesome, I am still saving money, hope I will buy it soon 😍 

Napsal : 13/10/2020 9:15 am
Stránka 8 / 8
Share: