Prusa3D Forum - Recent Topics

Printables - Suggestion Box

Eds_3D_Odyssey — Sun, 14 Jun 2026 19:54:38 +0000

Here are a few of my suggestions on how I think Prusa could make Printables better?

Printables needs a Rules page like the one Shane wrote for this forum. How can you enforce the rules if no one knows or understands what the rules are.
You need to print and take pictures of your models.
No AI pictures.
Change the Prusameters system. Instead of giving people Prusameters for downloads change it to Makes.
Let us use our Prusameters at Printed Solid.
Models need at least 1 download per year or it’s deleted.

Inherited Prusa XL 5 head

Josh Doolittle — Sun, 14 Jun 2026 19:54:10 +0000

My father passed a while ago and I have inherited his Prusa XL 5 head. I just got it home and I'm at a loss of where to begin. I've used resin printers before, but never a filament printer, and the person I would normally ask is no longer around to ask.

Where do I begin, what do I need to learn first, and what needs to be done or watched or read first to get started?

Thank you,

Josh

PET-CF config

Phil — Sun, 14 Jun 2026 18:01:10 +0000

I bought a spool of Siraya Tech PET-CF. On my Core One there isn’t a PET choice when loading filament. What do I do?

transferring to printer failed

Dik Harrison — Sun, 14 Jun 2026 17:21:38 +0000

I have a Core One and a MK 3.9 S. Lately I have been getting the Connect error "transferring to printer failed" when transfering to the Mk3.9S, but not to the Core One. Rebooting the printer has not helped.

How to make a filament usable on all Printers???

Bytor — Sun, 14 Jun 2026 14:55:57 +0000

A question for all you PrusaSlicer experts out there. How do you make it so that a filament profile, which is included with the PrusaSlicer configuration wizard, is available for ALL printers and profiles? I am going to be printing with some Taulman Bridge filament and knew that it was in the PS Wizard filament profiles. I selected it, and added it to my PS configuration.

My printer configuration is modified MK4S w/ MMU3 and the Taulman doesn't show unless I select a MK4 IS printer profile... this is despite that in the Filament Dependencies ALL is checked off for Compatible Printers and Compatible Print Profiles. I even tried unchecking these parameters and manually selected the printers and profiles that I wanted. Made sure I saved my changes. The Taulman filament still doesn't show. I even tried closing and re-opening PS.

I have a few other filaments I plan on printing with in the near future and don't want to have to struggle to get a filament to show up under a specific profile. All filaments should be available under all printers and profiles...

Design and Print Do Not Match

Ron — Sun, 14 Jun 2026 14:13:43 +0000

I need some serious help please. I use to have a copy of Fusion 360 as it was much easier to use versus Blender. In the past few months...Fusion decided they no longer support my iMac's OS. I have FreeCad as well as the new Plasticity that I've been using but there seems to be issues when exporting and trying to print. I am being told it's with my Slicer software (PrusaSlicer) but I'm not sure. It's a simple chain necklace emblem with 2 circles and then some writing on the top. It's NOT a difficult design but for some reason when I go to print, it's NOT turning out like what it looks like on the screen. The edges of the circles are very rough and not turning out good at all. I've wasted filament trying to figure this out. The bottom circle with the attached loop for a chain are Black and all the lettering and date are Gold. Can someone more experienced please take a look at this file and let me know what's going on? Thank you.

Slicer....

Drid-Ghost — Sat, 13 Jun 2026 21:48:18 +0000

Hello,

Is there actually any information regarding the software for INDX?

According to rumors, a new slicer should come, slicer 3.

Did anyone hear anything? Or will there not be a revised slicer?

Es geht so langsam los

Drid-Ghost — Sat, 13 Jun 2026 21:45:56 +0000

Hallo,

Nachdem im Englischem Forum schon gemeldet wurde das Bondtech die ersten FE Einheiten ab dem 25 Versendet hoffe ich das auch Prusa Anfang Juli damit beginnen wird.

Wer von euch hat alles ein FE bestellt?

Und wer hat bei Prusa direkt bestellt und welches kit habt ihr genommen?

Ich habe die 8 Kopf Version genommen bin in der Batch Eins.

Und hat jemand etwas über Slicer 3 gehört oder generell irgend etwas zum Bezug auf INDX und Slicer?

Nozzle swaps with tool impossible

langjai — Sat, 13 Jun 2026 20:59:07 +0000

Is anyone having problems with the nozzle replacement tool method? When I go that route, it's almost impossible to screw the nozzle in cleanly without crossthreading. I always end up having to go the long route. What am I doing wrong? Are there any tips or tricks?