Notifications
Clear all

Printing MK4 pccf parts with MK3.5s  

  RSS
Ezrae
(@ezrae)
Member
Printing MK4 pccf parts with MK3.5s

I wonder if anyone can point me to the correct settings for printing the MK4 Nextruder parts in pccf on my MK3.5. Just using the Prusament PCCF profile, .2 layer height, with a .4 nozzle leaves it super rough on top and the tolerances are a bit off. :/  Thanks!

Posted : 22/05/2025 7:44 pm
Share: