Help printing small part with TPU 95A - How do I print this? (Printing help)

Diem — Tue, 08 Apr 2025 16:46:32 +0000

Your file is useless for diagnosis, there are no settings included.

Load your file into PrusaSlicer, set up the slice, save your project as a .3mf file

Files > Save Project as

Zip the .3mf and post it here. It will contain both your part and your settings for us to diagnose.

But, looking at the shape, I suspect the design was not intended for FDM printing and the small footprint and overhangs will need to be addressed before it is suitable.

Cheerio,

RE: Help printing small part with TPU 95A

Lukáš Duběda — Tue, 08 Apr 2025 16:27:17 +0000

Here's the model: https://www.dropbox.com/scl/fi/oke7uw91uapbrfb18f48f/tryska_flex.3mf?rlkey=15x4joeuvel8f6lllnepgvz9a&dl=0

Help printing small part with TPU 95A

Lukáš Duběda — Tue, 08 Apr 2025 16:23:51 +0000

Hi,

I have problems printing a small part with Forward AM Ultrafuse TPU 95A.

1. My MK4 does not pull the filament properly, the spool gets stuck and not pulled, but this is least of the issues

2. Mostly I can't seem to print the part without it tearing apart and not finishing at all.

Do you have any tips on to printing the