Notifications
Clear all
Black screen issues....
Issue seems to be getting worse over time.
I turn my printer off when not in use. When I turn it on it loads the initial boot sequence and rather then showing me the main menu, I get a black screen with just the status bar across the bottom filled. I can tap on the screen and it beeps etc, but nothing else.
I then have to restart the printer (from the PSU) several times before it goes back to normal and loads properly again.
Any ideas?
Refresh firmware maybe?
Click here for VIDEO BUILD GUIDES + 3D Printing Tips & Tricks!
--> MK4 - MK4S - MINI+ - Accelerometer Guide - BambuLab A1 Combo <--
Posted : 01/11/2024 9:14 pm
Topic starter
answered:
RE: Black screen issues....
Have to restart several times to actually get my printer to work, if not I just get the attached......
Click here for VIDEO BUILD GUIDES + 3D Printing Tips & Tricks!
--> MK4 - MK4S - MINI+ - Accelerometer Guide - BambuLab A1 Combo <--
Posted : 02/11/2024 1:08 pm