Notifications
Clear all
Unreliable first layer
Publié : 11/04/2025 7:14 pm
Topic starter
answered:
RE: Unreliable first layer
Printed using Overture PLA. Layer degrades as it progresses. Nozzle at 200c heat bed at 58c.
Publié : 11/04/2025 7:17 pm
Topic starter
answered:
RE: Unreliable first layer
This was solved, I used the wrong model in the configuration wizard in Prusa slicer
Publié : 11/04/2025 8:24 pm
2 personnes ont aimé