Notifications
Clear all
Mk4 manual multimaterial single extruder mmu settings
I’m having a hard time with my MK4 doing manual multimaterial (single extruder mmu).
Almost everything is fixed except these settings because I’m missing the correct values for mk4.
Can you help me ?
- Cooling tube position
- Filament parking position
- Extra loading distance
Thank you for your help
Best Answer by vlaine:
It took me a while, but I found the proper settings.
I published my 3mf project and settings on Printables :
https://www.printables.com/model/919583
And here's a video of the result.
It also includes a demonstration of the filament holding technique:
Posted : 20/06/2024 1:21 pm
Topic starter
answered:
RE: Mk4 manual multimaterial single extruder mmu settings
It took me a while, but I found the proper settings.
I published my 3mf project and settings on Printables :
https://www.printables.com/model/919583
And here's a video of the result.
It also includes a demonstration of the filament holding technique:
Posted : 21/06/2024 10:45 pm
buchnema liked