Notifiche
Cancella tutti
Missing layer sections
My MK4 is randomly failing to print small sections of surface layers, as shown in this photo. It’s not often, maybe once every 10 prints. The anomaly does not appear in PrusaSlicer. Everything is updated as well. Any ideas what might be causing this?
Postato : 12/03/2024 2:14 am
RE:
Hi Stephen,
I have a similar problem. Sometimes you can see the perimeter of one layer is missing, sometimes, it is as with yours, part of a top infill seems as no extrusion happens.
I'll update my firmware to 6.0.1 and hope it will vanish.
Anybody has further suggestions, how to get rid of this behaviour?
PS: With PETG it seems to happen more often than with PLA, but this is not more than a gut feeling.
Regards,
Daniel
Questo post è stato modificato 1 year fa 2 tempo da the78mole
Postato : 05/06/2024 4:25 pm
RE: Missing layer sections
This could be closely related to the problem described in this post...
Postato : 05/06/2024 4:37 pm