Notifications
Clear all
Horrible noise while printing
Any idea what is causing this awful noise while printing? It only happens when the bed is moving very slowly. The belt is tensioned properly, the rods are centered and the bed slides back and forth without any resistance at all when the printer is powered off.
I've been feeling all around the printer to see if I could find anything loose or odd that might be contributing to this, but it all feels fine. I feel the bed vibrating a bit when the noise is happening, but that's it.
The printer is new; I took too long to assemble it (bought it last March, finally finished it a couple days ago). It's been happening since I started using it.
Thanks.
Posted : 31/12/2024 4:24 pm