Notifications
Clear all

Firmware 5.0.0 Failures  

  RSS
ChiTownGuy
(@chitownguy)
Estimable Member
Firmware 5.0.0 Failures

I am experiencing the following issues with 5.0.0 used with Prusa slicer 2.6.1 on my factory assembled mk4

  1. Crashes when printing either of the attached gcode files (the same stl with 0.20 speed and 0.20 structure, organic support and hexagon infil.  The printer beeps and returns to the print menu.  See uploaded pic.
  2. During the print of the above files the extruder will move to the extreme left or right side of the print bed even though there is nothing in the position to be printed.
  3. Lots of stringies.  See the image below.  The filament is Prusament PETG.
  4. Display does not display image being printed correctly.  See image below.
Posted : 19/09/2023 10:33 pm
ChiTownGuy
(@chitownguy)
Estimable Member
Topic starter answered:
RE: Firmware 5.0.0 Failures

Missing gcode files from above

Posted : 19/09/2023 10:34 pm
ChiTownGuy
(@chitownguy)
Estimable Member
Topic starter answered:
RE: Firmware 5.0.0 Failures

I downgraded the printer to 4.7.2 and resliced and it printed correctly.

Posted : 20/09/2023 8:34 pm
Share: