Notifications
Clear all
Print stopping at about 96-99% on certain 3mf prj's
With certain prints, for example scaling them down little bit, print keep stopping at same exact point, that is about 96-99%...extruder remains at printing temp and nothing change forever...
Usb stick on, last Prusa Slicer version and last fw. Printing settings the same, all default, I print IS printed, 0,20mm Structural. If I scale these projects up or down (the prints I made before the ones mentioned, same profiles and settings), problem seems not appearing...
Here's 2 3mf projects at which scales I have the issue : https://we.tl/t-hZPTUp2ylx
Thanks
This topic was modified 10 months ago by Denis Ferrari
Posted : 15/01/2024 10:47 pm