Notifications
Clear all
First print question
So when I do the first layer calibration the long zig zags are at .15 mm and when it does the square flag at the end its more like .49 mm.
What is going on?
I just changed to a Ruby nozzle and when I print a square 75mm x 75mm x .2mm the outer edge when the head is moving x or y only is about 2 mm and when I measure the inside (regardless of settings in prusa slicer) I get close to .45 mm..
Is it my settings or my filament?
JC
Posted : 16/03/2025 6:42 pm