Printing with PETG
Can anyone tell me printing PETG in a enclosure, What do we want the temperature to be?
RE: Printing with PETG
The extruder (cooling) is rated for max 40 degrees, so you need to keep below this.
RE: Printing with PETG
I guess the question needed to be what is the coolest temperature that it needs to be for the best possible print without causing a problem?
RE: Printing with PETG
I keep my enclosure at about 23C. No specific reason, apart from the fact it is enough to keep the humidity low as my filament is inside the enclosure during printing.
Cheers,Dave Jackson"Enthralled Nooby (not so much maybe, ~58 years old)... If 3d printers had been around 40 years ago... "
RE: Printing with PETG
@david-j21
Thank you so much! Very slow to get help here. Guess everyone is busy!
RE: Printing with PETG
I doubt that there are many people who heat their enclosures, except those who do a lot of printing with ABS.
To be honest, the only reason I heat/cool my enclosure is that it is located in my garage. In winter it can be as low as 6-7C, even with a parasitic radiator, which is no good for printing.
Cheers,Dave Jackson"Enthralled Nooby (not so much maybe, ~58 years old)... If 3d printers had been around 40 years ago... "