Adding Print to Prusaprinters with the Nozzle, Clock and Printer icons, How?
I've spent a couple of hours looking through the prints section of Prusaprinters.org and this forum and I cannot find how to add the fancy icons to my added prints (see attached pic).
Are there instruction available, if so where are they? If not can someone put me out of my misery and give me the code snippet?
Thanks for any help you can give.
Dave Jackson
Best Answer by Sembazuru:
I think it pulls those stats from a gcode if uploaded. It might be able to pull the stats from a .3mf project file, but I'm not sure if the site does. I wouldn't expect it to be able to pull any print stats just from .stl files.
I've only uploaded one thing so far. I have the stats on my upload, but I did include the gcode. Though, I wouldn't expect anyone to want to print my random gcode, so I did also include .3mf project files (one for Slic3r PE 1.41.3, and one for Slic3r PE 1.42.0 beta or what is now PrusaSlicer).
Cheers,Dave Jackson"Enthralled Nooby (not so much maybe, ~58 years old)... If 3d printers had been around 40 years ago... "
RE: Adding Print to Prusaprinters with the Nozzle, Clock and Printer icons, How?
I think it pulls those stats from a gcode if uploaded. It might be able to pull the stats from a .3mf project file, but I'm not sure if the site does. I wouldn't expect it to be able to pull any print stats just from .stl files.
I've only uploaded one thing so far. I have the stats on my upload, but I did include the gcode. Though, I wouldn't expect anyone to want to print my random gcode, so I did also include .3mf project files (one for Slic3r PE 1.41.3, and one for Slic3r PE 1.42.0 beta or what is now PrusaSlicer).
See my (limited) designs on:
Printables - https://www.printables.com/@Sembazuru
Thingiverse - https://www.thingiverse.com/Sembazuru/designs
RE: Adding Print to Prusaprinters with the Nozzle, Clock and Printer icons, How?
Of course, makes sense.
Like you I wouldn't expect anyone else to use my gcode, so I never even thought to upload it.
So if I want the pretty icons, I will have to!
Thanks very much Sembazuru.
Cheers,Dave Jackson"Enthralled Nooby (not so much maybe, ~58 years old)... If 3d printers had been around 40 years ago... "