3.12.0=BETA1 and Revo 6 Extruder - THERMAL ANOMALY
 
Notifications
Clear all

3.12.0=BETA1 and Revo 6 Extruder - THERMAL ANOMALY  

  RSS
madpro
(@madpro)
3.12.0=BETA1 and Revo 6 Extruder - THERMAL ANOMALY

Hi - Upgraded my MK3S+ to 3.12.0 BETA1 and tried to calibrate using M310 A F1 as per instructions on GiHub.  The calibration routine fails within a second or two with a message "THERMAL ANOMALY". At this point I am just reporting this in the forum. My opinion is that the heating process is so fast with a Revo 6 that the calibration process is detecting it as an anomaly. From 29 C the temp jumps to almost 50-55C in just two to three seconds and the error halts the process.  Will wait for a fix. 

Note: I did perform a PID calibration from the menu option before trying it, just for good measure. 

Keep up the good work Prusa Team!!!

Posted : 05/10/2022 1:59 am
Share: