Notifications
Clear all
Steampunk mobile turret
Here is my first effort at my own design. Printed off as one piece, which was maybe a mistake as it took me about 2 hours to remove all the support. Height is about 112 mm. I was a bit curious to see how Slic3r and the printer coped and have to say they did a pretty good job.
The print time was 13 hours with 0.1 mm slices/0.4 nozzle.
Posted : 26/03/2019 7:21 pm
Re: Steampunk mobile turret
Rhoooo lovely nice, i like it 😛
And if you print in several parts (principal, feet, arms) with no support ... ?
Posted : 26/03/2019 9:42 pm
Topic starter
answered:
Re: Steampunk mobile turret
Not sure. That's the next exercise.
Posted : 26/03/2019 10:44 pm
RE: Steampunk mobile turret
Confused Newbe here:
Is there a picture supposed to be with original post? I don't see it. Wrong browser perhaps?
Thanks
This post was modified 6 years ago by CyberBiker
Posted : 18/05/2019 1:27 pm
RE: Steampunk mobile turret
Same here - perhaps it didn't make the forum transfer.....
Posted : 18/05/2019 3:59 pm