Notifications
Clear all
Robotic Camera Platform
This is a 12:30 print in eSun PETG. It came out very well -- no warping, no blobs or cobwebs. Processed in Simplify3D with 50% infill using Josef's settings.
Posted : 16/07/2016 2:38 am
Re: Robotic Camera Platform
I am about to purchase a spool of PETG as well, but I am just curious how strong it is compare to ABS because I want to print some GoPro camera mount on my bike or some other things. Which Josef setting are you using "ColorFabb XT" or "Prusa PET", do I need to tweak a bit to get a clean print? Thanks.
Posted : 15/09/2016 10:41 pm
Topic starter
answered:
Re: Robotic Camera Platform
In my experience, PET is about as strong as ABS. I used Josef's PET settings in S3D with no alteration. I have been printing exclusively in PET for a couple of months with consistent success.
Posted : 16/09/2016 1:19 am
Re: Robotic Camera Platform
Thanks.
Posted : 17/09/2016 8:23 am