Prusa Weekly 3D Prints #5 - Iphone X case  

Prusa Weekly 3D Prints #5 - Iphone X case

Hey all:

So i noticed that Prusa has put a weekly 3d prints selection on the home page under the 3D models tab which contains some neat stuff. This week they put an Iphone X case in the prints for PETG, so I wanted to check it out. I can confirm that it does fit the Iphone XS regular (e.g. not the MAX size).

Now, the IphoneX is very expensive and everyone knows the cases are similarly expensive since it is so new. I had previously printed a minimalist case in PLA which actually did save my week old Iphone from a parking lot fall incident 😯 :shock:. Sadly, the case did not survive, but it did protect the phone from any damage 😀

I do not have any Orange PETG, so I printed in PLA and did a color switch with the ColorPrint function on the website to test it out. It came out pretty well. I did lose a small piece on the lower left corner, but don't care. 2 hour print in 0.15 detail Hatchbox PLA and Printed Solid Daily PLA.

There is an STL and a premade GCODE on the webpage, I used the STL and had to flip it over, but I presume the Prusa GCODE is already flipped.

Check it out if you need an Iphone X case cover on the cheap!