Notifications
Clear all
Doll House from Ma. K.
Hey guys this is my recent print.
I used Blender, Prusaslicer and i3 MK III printer. Layer height was 0.15mm, perimeter 3mm, infil 6% rectilinear.
I used supports and brims if necessary, and draft shields for large parts.
This is Sci-Fi tank from Ma.K. universe. The original design is by Mr. Kow Yokoyama at year 1982.
The size is approximately 17.5cm x 21cm x 15.5cm
Posted : 07/08/2024 9:42 pm