Mini - X and Y axis are moved, bed level calibration fails
 
Notifications
Clear all

Mini - X and Y axis are moved, bed level calibration fails  

  RSS
Grzegorz K
(@grzegorz-k)
New Member
Mini - X and Y axis are moved, bed level calibration fails

Hi,

I have some problems with my Mini. Both X and Y axis are moved towards front (screen). As a reference model I used MK bed calibration model, but I scaled it in Prusa Slicer in both X and Y to square 160x160mm and left Z value untouched. I also aligned model to centre of the bed.

I did the same test after factory reset - with the same result. I did some prints and they were fine. It looks like printer does not read/find 0,0 

value correctly - printable area is moved somehow.

Second I have some problems with right upper corner of my bed. As I researched this forum it looks like bed is slightly bended from nozzle, am I right? How can I fix this? 

Thanks a lot for any help!

 

 

Posted : 29/11/2021 10:40 am
Share: