Notifications
Clear all
Equally Spaced Banding
See attached photo showing banding across the entire print. They are about 25mm apart. They appear on all layers (photo is showing the second layer). This is a functional part so the banding is not an issue. Just thought I'd ask to see if I can find out the cause and how to fix it.
I just received the MINI+ last week and it's my first 3D printer so I'm very new to this.
- Printer: Prusa MINI+
- Layer height: 0.2mm
- Nozzle temp: 222C
- Bed temp: 63C
- Filament: Hatchbox 1.75mm
Posted : 04/03/2021 9:28 am