Cant print anything - Assembly and first prints troubleshooting

RE: Cant print anything

Jullicca — Fri, 30 Jan 2026 10:30:22 +0000

okay the print did stick better (1 video) it didnt came off in the first 30 seconds. Problem is now that the printer kind of breaks the model itself, it prints too close to the last line and the printing doesent look smooth it goes over the last line all the time (2 video) thanks for the help already

RE: Cant print anything

Jullicca — Fri, 30 Jan 2026 07:06:46 +0000

Thanks i will try that

RE: Cant print anything

JoanTabb — Thu, 29 Jan 2026 16:27:18 +0000

Hi Jullicca

it's possibly poor adhesion.

I take my build plate to the kitchen sink,
Using a NEW, grease free, kitchen sponge, and basic kitchen soap, like Dawn, or Fairy liquid. wash the build plate with a little dish soap and HOT water, scrub well with the dish sponge and rinse well with HOT Water, then dry both sides with plain paper towels, keeping your fingers off the print bed surface, then try printing, again.
regards Joan

Cant print anything

Jullicca — Thu, 29 Jan 2026 11:47:14 +0000

IMG_0597

i cant print anything, the print starts to geto of every thime seems like the nozzle is going too close to the last line? Help!