|
That was the reason, along with the z-seam gap issue, to sel... En el foro Input Shaper (MK4) |
hace 4 months |
|
In my case the vertical lines are more visible on the X-Axi... En el foro Input Shaper (MK4) |
hace 1 year |
|
Yes, I tried to do this. But unfortunately the result still ... En el foro Input Shaper (MK4) |
hace 1 year |
|
I absolutely agree with you. A accelerometer costs only a fe... En el foro Input Shaper (MK4) |
hace 1 year |
|
Ok, that is really strange. Did you already contacted Prusa ... En el foro Input Shaper (MK4) |
hace 1 year |
|
No I did not had this issue you have in this video. En el foro Input Shaper (MK4) |
hace 1 year |
|
After changing the Hotend from the revo to the original one ... En el foro Hardware, firmware and software help |
hace 1 year |
|
The support Team now came up with a solution which may work ... En el foro Input Shaper (MK4) |
hace 1 year |
|
yes in both profiles En el foro Input Shaper (MK4) |
hace 1 year |
|
Hi Cloud, I chatted with prusa support and they are currentl... En el foro Input Shaper (MK4) |
hace 1 year |
|
I simply set the bed temperature via the menu and then I sen... En el foro Hardware, firmware and software help |
hace 1 year |
|
This is the output of the G29 command: I also tested differe... En el foro Hardware, firmware and software help |
hace 1 year |
|
No it is happening on both axis but the spacing of the rippl... En el foro Input Shaper (MK4) |
hace 1 year |
|
I printed an IS Test too, but there is no ideal Frequency to... En el foro Input Shaper (MK4) |
hace 1 year |
|
Strange First Layer Issue En el foro Hardware, firmware and software help |
hace 1 year |
|
Printing with IS is worse than without (Ringing) En el foro Input Shaper (MK4) |
hace 1 year |
|
Re-exporting it as a new step or 3mf file didn't helped. It ... En el foro Hardware, firmware and software help |
hace 1 year |
|
Here are my files. One is the original Fusion 360 file and t... En el foro Hardware, firmware and software help |
hace 1 year |
|
I am using the latest firmware and latest prusa slicer (not ... En el foro Hardware, firmware and software help |
hace 1 year |
|
Prusa Slicer Bug causes bad prints on MK4 En el foro Hardware, firmware and software help |
hace 1 year |
