Aktivität
 
Benachrichtigungen
Alles löschen
nick.c2
nick.c2
Gruppe: Registriert
Beigetreten: 2016/06/25
Eminent Member
2
I'm an idiot, I had it plugged into the HB 😳 . I'm goi...

Im Forum Others (Archive)

Vor 8 years
Replaced PEI sheet, but now the logic fuse blows.

Im Forum Others (Archive)

Vor 8 years
Stringing/Oozing on my second MK2 Build.

Im Forum Others (Archive)

Vor 8 years
Guess I just missed that window 😥 The PEI sheet is wo...

Im Forum Others (Archive)

Vor 8 years
I've tweaked the z-axis higher than it should be during a pr...

Im Forum Others (Archive)

Vor 8 years
Hi Jan, For that print I used this: I've also used this b...

Im Forum Others (Archive)

Vor 8 years
So is this normal then? No responses from anybody.... Cheer...

Im Forum Others (Archive)

Vor 8 years
Thanks Peter, I did rearrange the cables after I found the f...

Im Forum Others (Archive)

Vor 8 years
Cheers Richard, the connector was not seated properly. I use...

Im Forum Others (Archive)

Vor 8 years
Gotcha, will check the connection. My kit is actually stock...

Im Forum Others (Archive)

Vor 8 years
Second Print - Some Issues

Im Forum Others (Archive)

Vor 8 years
Loud Noise from y-axis in one direction only.

Im Forum Others (Archive)

Vor 8 years
I bought the MK2 upgrade, frame, and Rambo mini separately a...

Im Forum Others (Archive)

Vor 8 years
Thanks, that's a great description of the process. Will star...

Im Forum Others (Archive)

Vor 8 years
Nozzle position in relation to pinda sensor.

Im Forum Others (Archive)

Vor 8 years
I figured it out. Brought it over to the mac, still no luck ...

Im Forum Others (Archive)

Vor 8 years
Haha, no worries Nigel, but yes it is definately powered.

Im Forum Others (Archive)

Vor 8 years
Okay, so uploading from arduinoIDE results in the same 15 se...

Im Forum Others (Archive)

Vor 8 years
Thanks for the reply christophe. No, the lcd is blank, does ...

Im Forum Others (Archive)

Vor 8 years
Trouble Uploading Firmware to Rambo Mini 1.3

Im Forum Others (Archive)

Vor 8 years
Seite 1 / 2
Teilen: